EGO PH1400E Repair Guide Line

Troubleshooting
3
Problem
Possible Cause
Fault Position
Test & Solution
Noise
Shaft is worn
Connecting tube
Take the shaft assembly out from the
connecting tube to check whether it is
broken, if it is worn, replace it with a new
one
Not working
The fuse is broken
Fuse in PCBA assembly
Replace the PCBA with a new one
PCBA is broken
PCBA in the housing
assembly
Replace the PCBA with a new one
Speed failure
Speed change switch is
broken
Handle assembly
Replace the switch with a new one

EGO PH1400E Specifications

General

Brand	EGO
Model	PH1400E
Category	Power Tool
Language	English