44
1. Accelerator lever
2. Power button: Press for approx. 1 second for power on
and 3 seconds for power o.
3. Set-up button: Keep pressing to change between the following functions:
a Trip = distance travelled since last resetting the display (reset: keep set-up
button pressed for the “Trip” function until it flashes twice)
b Odo = Odometer = total distance travelled
c Blank description field = charging cycle counter
4 . Battery display (all bars black = battery fully charged; the fewer the bars are
black, the less the battery is charged.)
5. Speed display in km/h.
1
2
3
4
5
FIRST STEPS AND GETTING STARTED
Tachometer
To Next Page
Loading...
