EasyManua.ls Logo

EHEIM classic 600 - Product Instructions 2215;2217; Important Safety Instructions; Danger: Electric Shock Precautions

EHEIM classic 600
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Filter Filterschwamm 2x Filtervlies 3x Kohlevlies 3x MECH SUBSTRATpro
2215 2616151 2616155 2628150
2507051 (1 l) 2510051 (1 l)
2510101 (2 l)
2217 2616171 2616175 2628170
2507751 (5 l) 2510751 (5 l)
Pflege und Wartung
I Netzstecker ziehen, Pumpenkopf abnehmen. Verriegelung am Pum-
penkopf lösen. Pumpenteile entsprechend der Zeichnung entneh-
men. Alle Teile mit EHEIM Reinigungsbürste für Pumpenkammer
(Art.-Nr. 4009550) reinigen und in gleicher Reihenfolge wieder zu-
sammensetzen.
Hinweis: Die kompletten Schlauchverbindungen in regelmäßigen
Abständen auf korrekten Sitz prüfen.
Achtung: Achse im Lagerkörper und der darauf aufgesetzte Pum-
penflügel müssen leichtgängig sein, damit die Pumpe einwandfrei
anläuft.
IMPORTANT SAFETY INSTRUCTIONS
WARNING To guard against injury, basic safety precautions should
be observed, including the following.
a)
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS.
b) DANGER To avoid possible electric shock, special care should be
taken since water is employed in the use of aquarium equipment. For
each of the following situations, do not attempt repairs by yourself;
return the appliance to an authorized service facility for service or dis-
card the appliance.
1) If the appliance falls into the water,
DON’T reach for it! First un-
plug it and then retrieve it. If electrical components of the appliance
get wet, unplug the appliance immediately. (Non-immersible equip-
ment only)
2) If the appliance shows any sign of abnormal water leakage, im-
mediately unplug it from the power source. (Immersible equipment
only).
3) Carefully examine the appliance after installation. It should not be
plugged in if there is water on parts not intended to be wet.
4) Do not operate any appliance if it has a damaged cord or plug, or
if it is malfunctioning or has been dropped or damaged in any man-
ner.
5) To avoid the possibility of the appliance plug or receptacle getting
wet, position aquarium stand and tank to one side of a wall-mounted
receptacle to prevent water from dripping onto the receptacle or plug.
A ”drip-loop”, shown in the figure, should be arranged by the user for
INSTRUCTIONS 2215 / 2217

Related product manuals