English
19
‧ Only carry out the work described in these instructions.
‧ Only use original spare parts and accessories for the appliance.
‧ The appliance should be protected by a residual current protection
device with a maximum rated residual current of 30 mA. Please
contact an electrician if there are any questions or problems.
‧ In the event of water leakage or when the residual current protec-
tion device is triggered, immediately disconnect all devices in the
aquarium from the power supply.
‧ If they are not being used, always disconnect all devices in the
aquarium from the power supply before you install/remove any parts
and before all cleaning and maintenance work.
‧ Protect the mains socket and mains plug against mois-
ture and wetness. A drip loop must be formed with the
mains cable. This prevents any water running along the
cable to the mains socket, which would result in a
short-circuit.
‧ The electrical data of the appliance must match the data of the
power mains. This data is found on the type plate, the packaging
and in these instructions.
To Next Page
Loading...
