English
22
7. Clearing faults
DANGER! Electrocution!
▶ Before clearing faults, remove the mains plug.
Faults Possible cause Remedy
Pump does not start No mains voltage ▶ Check the mains
voltage
▶ Check the supply line
Pump does not pump Mains plug is not inserted ▶ Insert the mains plug in the mains
socket
Impeller is blocked ▶ Clean the pump
Thermal cut-out has activated 1. Remove the mains plug and let the
pump cool down.
2. Insert the mains plug again after
approx. one hour.
Pump not pumping suciently Power controller is dirty ▶ Clean the power controller
For other faults, please contact EHEIM Service.
8. Decommissioning and disposal
Storage
1. Take the appliance out of the aquarium.
2. Clean the appliance
3. Store the appliance in a frost-proof place.
Disposal
When disposing of the appliance, heed the respective statutory regulations. Information on the disposal of electrical and elec
-
tronic appliances in the European Union:
Within the European Union, disposal of electrically operated appliances is governed by national regulations that are based on
the EU Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). The appliance may no longer be disposed
of with the municipal or household waste. The appliance will be accepted free of charge at municipal collection points or
recycling centres. The product packaging is made up of recyclable materials. Dispose of them in an environmentally responsible
manner and take them for recycling.
To Next Page
Loading...
