To Next PageTo Next Page
Need help?Do you have a question about the EHEIM Professionel II 2026 and is the answer not in the manual?
General| Model | Professionel II 2026 |
|---|---|
| Type | Canister Filter |
| Filtration Stages | 3 |
| Delivery Head | 1.5 m |
| Power Consumption | 20 W |
| Hose Size Inlet | 16/22 mm |
| Hose Size Outlet | 16/22 mm |
| Suitable for Fresh Water | Yes |
| Suitable for Sea Water | Yes |
| Hose Diameter | 16/22 mm |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Category | Canister Filter |
Adhere to all safety instructions provided in the manual for safe operation.
Avoid electric shock by taking precautions when water is used with equipment.
Close supervision is required when the appliance is used by or near children.
Do not touch moving parts or hot components like heaters or lamps.
Always unplug appliances before cleaning or when not in use.
Use the appliance only for its intended purpose; avoid unauthorized attachments.
Install and store the appliance away from weather or freezing temperatures.
Ensure the appliance is securely mounted on the tank before operation.
Read and follow all important notices displayed directly on the appliance.
Use appropriately rated extension cords and arrange them to prevent tripping.
Use the polarized plug correctly; do not defeat its safety feature.
This filter is intended for indoor use and aquaristic applications only.
Switch off all electrical appliances before placing hands in aquarium water.
Thermofilters are for freshwater; saltwater versions may be available.
The mains cable is non-replaceable; contact service if damaged.
Create a drip loop to prevent water from reaching the socket.
If using a multiple socket, place it above the filter's mains connection.
Step-by-step guide for connecting and securing the filter adapter.
Instructions for connecting intake and outlet hoses and spray bar.
Guidelines for placing the filter correctly within the cabinet.
How to install the temperature sensor and thermostat for the thermofilter.
Process for rinsing and filling the filter media containers correctly.
Steps to open the filter, fill it with media, and prepare for closing.
Guide to properly closing the filter head and re-attaching the adapter.
Procedure for priming the pump and starting the filter operation.
How to adjust the filter's output flow rate using the adapter lever.
Understanding the indicator for monitoring water circulation and potential faults.
Instructions for cleaning the filter hoses using a universal cleaning brush.
Steps to disassemble and clean the pump head, impeller, and chamber.
How to clean the flow indicator components like the float and support.
Lubricating the O-ring of the priming support for smooth operation.
Common causes and remedies for the filter head not locking properly.
Troubleshooting steps for leaks occurring at the filter head area.
Diagnosing and resolving issues where the pump does not function.
Identifying and fixing causes for reduced filter output or efficiency.
Troubleshooting air ingress into the filter system and its causes.
Solutions for a priming support that is not operating smoothly.
