Pushing the latch can open the desiccant
placement slot. When dryer is not working,
the internal desiccant helps to create a drier
environment inside the box, preventing
moisture buildup.
To enable the rotation of
one side of the filament
spool while feeding the
other side to the printer,
you can accomplish this
by replacing one of the
rollers that are included
in the spare parts.
TIPS
Rotating the top exhaust vents allows you to
adjust the exhaust size, thereby regulating
the drying effect.
When not using heat, you can close the
exhaust vents and insert silicone stopper
into the three holes on the top to prevent
excessive moisture from entering.
The product is equipped with three
directional 3D printing filament outlets,
and you can freely choose the outlet
direction based on the printer's
position.
Adding a PTFE tube can make the
feeding process smoother.
To Next Page
Loading...