2
22
2
1
-800-497-4524 EIC SOLUTIONS, INC
.
215-443-5190
This manual is intended for models AAC-141-4XT-EP, AAC-141-4XT-HC-EP, AAC-141-4XT-NF-EP, and
AAC-141-4XT-HC-NF-EP only.
For use in: Class I, Division 2, Groups A – D Hazardous Locations
Operating temperature code: T4
Ambient temperature range: -20 to 60°C
Voltage: 120V or 220V AC
These thermoelectric air conditioning units are to be mounted half outside and half inside a
cabinet. The outside of the cabinet may be in outdoor atmosphere. There is a barrier in the middle
of the unit separating inside and outside sections. The unit is intended to be permanently
connected.
The unit meets the following standards:
ANSI/ISA-12.12.01-2012 Nonincendive Electrical Equipment for Use in Class I and II, Division 2
and Class III, Division 1 and 2 Hazardous (Classified) Locations, Dated 07/09/2012.
UL 823-Issue:2006/10/20 Ed:9 Rev:2012/01/31 UL Standard for Safety Electric Heaters for Use
in Hazardous (Classified) Locations.
UL1995 Standard for Safety Heating and Cooling Equipment, 4th edition, October 14, 2011
To Next Page
Loading...