Need help?Do you have a question about the Eikon CM602 and is the answer not in the manual?
Microphone model identification: CM602.
Type of condenser capsule used: Back Electret Condenser.
Microphone's directional polar pattern: Uni-directional.
Frequency range the microphone captures: 50Hz-18kHz.
Microphone sensitivity: -45dB 3dB (0dB=1V/Pa at 1kHz).
Microphone output impedance: 200 ohms.
Maximum sound pressure level before distortion: 130dB.
Signal-to-noise ratio: 70dB.
Required power for operation: Phantom 24-48V.
Audio connector used: Standard XLR.
Accessory provided with the microphone: Clamp.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz - 20kHz |
| Power Requirements | 48V Phantom Power |
| Connector | XLR |
To Next Page
