EINHELL GC-ET 4530 User Manual

GB
- 15 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
Please note that batteries and lamps (e.g. light bulbs) must be removed from the tool before it is dispo-
sed of.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac-
companying products is permitted only with the express consent of the Einhell Germany AG.
Subject to technical changes
Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 15Anl_GC_ET_4530_Set_EX_UK_SPK7.indb 15 24.08.2023 13:28:4524.08.2023 13:28:45

EINHELL GC-ET 4530 Specifications

General

Power source	Electric AC
AC input voltage	230 V
AC input frequency	50 Hz
Line diameter	1.4 mm
Product color	Aluminium, Black, Orange
Rotational speed	8800 RPM
Secondary handle	Yes
Line length supplied	10 m
Cutting diameter (max)	300 mm

Weight and Dimensions

Depth	940 mm
Width	255 mm
Length	140 mm
Weight	2640 g