EINHELL TE-OS 18 Li User Manual

GB
- 22 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Grinding/sanding plate, Battery
Consumables* Grinding/sanding paper
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_OS_18_Li_SPK7.indb 22 24.10.2016 14:16:05
www.sidirika-nikolaidi.gr

EINHELL TE-OS 18 Li Specifications

General

Eccentricity	0.8 mm
Idle speed (max)	24000 RPM
Oscillating orbit diameter	1.6 mm
Sanding surface	0.104 m²
Power source	Battery
Type of sander	Multi sander

Weight and Dimensions

Sanding plate size (WxD)	150 x 150 mm