19
INITIAL SETUP (CONT.)
Please be sure in this step, select “HOME” if you are using this TV for use at home.
Make sure to confirm once you have selected “HOME”.
CHANNEL SCAN - Make sure to select “ANTENNA” for DTV in AUSTRALIA.
NOTE: Please make sure Antenna (RF) cable is plugged into the ANT IN port located on back
of TV. (refer to page 11 TV ports - #10).
On the next step, make sure to select “SCAN” to auto tune your TV to search for local
DTV channels.
To Next Page
Loading...
Need help?
General
