OVERVIEW AND SUPPORTED FEATURES
The ELAN HHR (Hand Held Remote) family of Handheld Remote Controls utilize instant-on WiFi
technology to provide a quick and seamless interface to an ELAN Home Control system for control of
media devices and various subsystems in the home. The HR30 model remote includes an LCD
touchscreen interface for customizable control plus adds several of the most common hard buttons found
on typical universal remotes.
THE HR30 HANDHELD REMOTE CONTROLS SUPPORT THE FOLLOWING FEATURES:
Wireless Connectivity: The HHR connects via 2.4 GHz Wi-Fi and can be used up to 30’ from its WAP.
See the Wi-Fi connections section below for details on the HHR compatibility.
System Mode Control: The home interface may be optionally configured to provide system mode status
and control.
Current Weather and Forecast information: The home interface may be optionally configured to
display basic weather conditions and forecast information. Press the home icon on the HHR main menu
page to access the house mode and weather pages.
Lighting Control: The lighting interface can be configured to display one or more custom lighting
keypads and/or custom lighting pages on the remote interface for 2-way control of scenes or lighting
devices. Lighting scheduling is not supported on the remote interface. Press the lighting icon on the
HHR main menu page to access the lighting keypad and lighting custom pages.
Climate Control: The climate interface displays status of one or more climate zones and provides mode
and fan control plus heating and cooling set point adjustments. Scheduling and custom tabs are not
supported. Press the climate icon on the HHR main menu page to access the climate page.
Media Control: The media interface displays status of the currently selected media zone and provides an
interface for source selection and control. Press the Media hard button or the media icon on the HHR
main menu page to access the current media zone page. The interface provides metadata feedback for
supported two-way devices or customizable single or multi-page interfaces for one way device control.
Press the Rooms button on the remote to change the current zone for the remote to control. Custom
controls that are supported for use on the remotes UI are: Audio Button, Audio Keypad, Audio Keypad
Text View, Audio Mode Control, Audio Sound Adjust, Channel Favorite Button, & Static Text control. See
other limitations below.
Security Control: The Security interface will show panels and partitions and show if they are armed or
not. You can also directly arm and disarm security panels directly from the HR30.