To Next Page

To Previous Page

Owner's Manual

4.4.1 Procedure for Changing Gas Cylinder

4.4.2

observation of the pressure gauge for pressure drop with appliance valves closed and

cylinder valve opened, then closed (if fitted with gauge on supply pressure side)

Never turn the reglator valve directly from 'on' to the 'disconnect' position.

Always wait until the flame is completely out. If gas escapes when

regulator is removed, replace it immediately to stop leak, then call a local

gas supplier. Never disconnect regulator if flame stays lit.

Test the LPG system for leakage regularly. Check all connections for leakage by:

Caution

Turn the regulator switch to 'off'.

Ensure the regulator's gas switch is set to 'off' position.

Remove the new cylinder's valve safety cap.

Never allow gas cylinders to fall. Keep caps in position on the bottle neck

while moving cylinders. Use a gas cylinder cart while transporting long

distances. Keep stored gas cylinders secure at all times.

Press the 'disconnect' button at base of regulator to release regulator from the valve of the

empty cylinder and lift regulator off valve.

Refit the safety cap onto the empty cylinder valve immediately.

Caution

testing with soapy water or detergent solution (with appliance-burner valves closed and

cylinder and system valves open)

If leakage is present, close the cylinder valve and have the system

repaired before further use. System repairs should be made by a

competent person.

LPG lines must be inspected regularly, at least annually, and replaced if

any deterioration is found.

Never use a flame to check for leaks.Danger

manual leak testing

Inspection of Gas System

routine observation of the bubble-leak detector (if fitted)

Caution

Place regulator over cylinder valve and press down firmly onto valve until you hear a

definite 'click'.

Check pressure guage indicates a satisfactory reading.

Make an inspection of the connections and if satisfied that all is securely fastened, turn the

regulator switch to 'on'.

Technical Software

25/44

Elan Impression i40.1 User Manual

Questions and Answers: