Need help?Do you have a question about the Elation DMX Operator 192 and is the answer not in the manual?
General| Brand | Elation |
|---|---|
| Model | DMX Operator 192 |
| Category | DJ Equipment |
| Language | English |
Lists key capabilities including channel faders, DMX channels, memory banks, and chase features.
Details power input, fuse, MIDI/DMX connectors, sound input, EXT STEP CONTROL, dimensions, and weight.
Instructions for transferring data from the DMX Operator-192 console to a USB memory stick.
Introduces the DMX Operator-192 and details essential safety precautions for its use.
Provides cautions for unpacking and notes on specification changes.
Identifies and explains the purpose of each control element on the front panel of the DMX Operator-192.
Instructions for reloading files from a PC and deleting/formatting files on a USB memory stick.
Details the process of transferring files from a USB memory stick to a computer using the Operator-192 software.
Identifies and explains the purpose of each connector and switch on the rear panel of the DMX Operator-192.
Detailed steps to assign the joystick's Pan and Tilt functions to specific fixture channels.
Explains how to transfer data from the DMX Operator-192 console to a USB memory stick.
Details the process of transferring data from a computer to the console using the ULink cable.
Explains how to set up reverse Pan and Tilt controls for fixtures using the joystick.
Steps to remove joystick Pan/Tilt assignments for individual fixtures.
Procedure to clear all joystick Pan/Tilt assignments for all fixtures at once.
Guide to operating the console in manual mode, using faders and joystick to control fixtures.
Instructions for transferring data from the console to a computer using the ULink cable.
Details how to configure fade time to affect only specific channels or all channels.
Guides on setting the MIDI channel and explains MIDI control for banks, chases, and blackout functions.
Step-by-step instructions for recording new scenes and editing existing ones.
Details the process for copying individual scenes and deleting single or all scenes.
Explains manual, auto, and audio trigger methods for playing back chase sequences.
Guides on copying entire scene banks or individual fixture settings to other locations.
Steps for removing specific chases or clearing all recorded chases from the console.
Explains manual, auto, and audio trigger methods for playing back chase sequences.
Details manual, auto, and audio trigger methods for playing back scenes.
Instructions for recording individual chase steps and entire scene banks into chases.
Procedures for adding new steps or removing individual steps from existing chases.
To Next Page
