Need help?Do you have a question about the Elation PLATINUM SPOT 5R PRO and is the answer not in the manual?
General| Brand | Elation |
|---|---|
| Model | PLATINUM SPOT 5R PRO |
| Category | Light Fixture |
| Language | English |
Overview of the fixture, manual, and safety protocol.
Contact details for help, warranty registration, and service procedures.
Specific warnings about touching, cooling, and replacing the discharge lamp.
Information on UV radiation harm and warnings for individuals with epilepsy.
Guidelines on grounding, qualified electricians, and power cord handling.
Warnings against outdoor use and unauthorized modifications that void warranty.
Guidelines for safe operation, including fan clearance and avoiding contact.
Procedures for safe service, lamp replacement, and installation.
Warnings about rain, moisture, heat, and cautionary symbols.
Warnings about damaged cords and caution regarding light source exposure.
Details on pan/tilt range, operation modes, color and gobo wheels, and effects.
Guidelines for installation location, distance from flammables, and safety cables.
Advice on fixture handling, avoiding brute force, and qualified operation.
Diagram and list of fixture components, including lens, display, buttons, and ports.
Detailed explanation of buttons (Mode/Esc, Up, Down, Enter) and display functions.
Description of DMX input/output jacks, power cord, and fuse holder.
Explanation of the lamp protection system and automatic shutdown at 2000 hours.
Essential safety rules for lamp replacement, including power disconnection and cooling.
Guidelines for handling new lamps and step-by-step installation process.
Procedure to reset lamp run time to avoid protection circuit issues.
Safety cautions for mounting areas and operational positions (hanging/surface).
Information on overhead mounting requirements and ensuring qualified installation.
Details on using Omega brackets, clamps, and safety cables for secure mounting.
Explanation of DMX-512, linking, and data cable requirements.
Diagrams of 3-pin and 5-pin XLR DMX connector pin assignments.
Importance of DMX terminators and 3-pin to 5-pin XLR conversion.
Procedure for setting DMX starting addresses and troubleshooting DMX signal issues.
Overview of the menu system and functions of navigation buttons.
Table detailing menu functions like Set DMX Address, Value Display, and Lamp Control.
Explanation of Set DMX Address, Value Display, Set to Slave, and Auto Program.
Manual and automatic control of lamp power via the system menu.
Configuration of DMX address remote adjustment (RDMX) and no DMX status.
Settings for pan/tilt reversal, resolution, feedback, and motor speed modes.
Adjusting mic sensitivity and fan speed control.
Customizing display behavior and resetting fixture motors.
Procedure to set or adjust the fixture's starting DMX address via the display.
Controller configurations for setting DMX addresses using specific channel values.
Explanation of the six operating modes: Auto Program, Music Control, DMX Control.
How to run the fixture in stand-alone or master/slave modes.
Overview of memory capacity and the process of building scenes.
Procedure for storing scenes from a DMX console into the fixture's memory.
Steps for building internal programs from scenes and initiating program playback.
Chart detailing the function and values for each of the 23 DMX channels.
Detailed breakdown of DMX channel functions for Pan, Tilt, and Color Wheel.
Detailed breakdown of DMX channel functions for Gobo Wheels and indexing.
Detailed breakdown of DMX channel functions for Prism and Macros.
Detailed breakdown of DMX channel functions for Focus, Zoom, and Strobe effects.
Detailed breakdown of DMX channel functions for Dimmer, Iris, and Frost.
Detailed breakdown of DMX channel functions for speed, macros, and internal programs.
Explanation of error code format and the fixture's reset/test mode behavior.
Descriptions of errors related to tilt motor and color wheel malfunctions.
Descriptions of errors related to gobo, prism, and focus motor malfunctions.
Key points to check during inspection, including screws, deformations, and cables.
Charts showing beam opening, intensity (lux), and diameter at different distances.
Visual representations of the available rotating and static gobos.
Diagrams showing fixture dimensions and notes on adding omega clamp height.
Diagrams illustrating the fixture's internal electrical components and connections.
Details on warranty period, coverage, and conditions that void the warranty.
Exclusions for accessories, implied warranties, and liability for damages.
Details on power supply, lamp type, wattage, life time, and optical system.
Information on DMX channels, weights, measures, and noise levels.
To Next Page
