EasyManua.ls Logo

Electric Bike Outfitters KT-LCD3 User Manual

Electric Bike Outfitters KT-LCD3
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
KT-LCD3 User Manual
Question and Answer IconNeed help?

Do you have a question about the Electric Bike Outfitters KT-LCD3 and is the answer not in the manual?

Electric Bike Outfitters KT-LCD3 Specifications

General IconGeneral
Display TypeLCD
Voltage24V/36V/48V
Speed MeasurementYes
Battery Level IndicatorYes
BacklightYes
Waterproof RatingIP65
BrandElectric Bike Outfitters
ModelKT-LCD3
CategoryBicycle Accessories

Summary

Preface

Outlook and Size

Physical dimensions and appearance of the LCD unit and mounting hardware.

Installation Instructions

Handlebar Diameter Installation

Guides for mounting the LCD on handlebars of different diameters (31.8mm and 22.2mm).

Function Overview

Displayed Data and Functions

Overview of various data fields and core functions of the KT-LCD3 display.

Button Definition

Control Button Identification

Identifies the UP, DOWN, and POWER buttons on the operating panel.

Basic Operation

Power Control and Initial Display

Instructions for powering on/off and the initial display setup on start-up.

Battery Capacity and Pedal Assist

Explains the battery indicator and how to adjust pedal assist levels.

Speed and Walk Functions

Details on real-time speed display and the 6Km/H power walk function.

Cruise and Backlight Control

Instructions for activating cruise control and managing backlight brightness.

Temperature and Data Management

Information on displaying motor/ambient temperature and clearing data.

Error Codes and Alarms

Explains fault codes and motor temperature alarms displayed on the LCD.

User Settings

General Settings

Configuration of maximum speed, wheel diameter, and units.

P Parameter Settings

Configuration for motor characteristics, speed signals, and throttle control.

C Parameter Settings

Configuration for sensors, motor, brightness, system, and advanced settings.

Parameter Copy

LCD Parameter Copying

How to copy settings from one KT-LCD3 to another using an adapter cable.

Version Information

KT-LCD3 Model Information

Provides version and release date information for the KT-LCD3.

Contact Us

Contact Information

Provides company address, phone number, and email for inquiries.

Default Settings

Default Parameter Values

Lists default values for all P and C parameters.