To Next PageTo Next PageWhat to do if Electric Bike Technologies Bicycle shows Error 23?
If your Electric Bike Technologies Bicycle displays Error 23, it could be due to several reasons: the motor cable might not be fully plugged in, there could be damage to the motor cable, or the wheel might be on backwards. Make sure the motor cable is completely connected, check the cable for any signs of damage, and verify that the wheel is correctly installed.
What causes Error 30 on Electric Bike Technologies Liberty Trike?
If you're seeing Error 30 on your Electric Bike Technologies Bicycle, it indicates a potential issue with a bent pin in the communications line from the controller to the LCD. Inspect the pins in the communications line for any bending and correct them.
How to fix Error 22 on Electric Bike Technologies Liberty Trike?
If your Electric Bike Technologies Bicycle is showing Error 22, the issue might be a throttle that's stuck or a bent pin. Check the throttle to ensure it's not stuck and inspect for any bent pins.
General| Battery | Lithium-Ion |
|---|---|
| Battery Capacity | 10.4 Ah |
| Max Speed | 12 mph |
| Frame | Steel |
| Display | LCD Display |
| Type | Electric Trike |
| Battery Voltage | 36V |
| Range | 20-40 miles |
| Gears | 7-Speed |
Provides contact information including email and phone number.
Offers assistance through a service desk and helpful videos.
Links to official social media pages for community engagement.
Details the 21-day return policy for full refunds, excluding shipping.
Policy for returns within 30 days, including restocking fees.
Information on trial periods for refurbished units.
Procedure for initiating repair or replacement requests.
Information on the timeline and method of refund issuance.
Covers frame, fork, and electronic components for one year from purchase.
Lists exclusions like spin outs, over voltage, and damage.
Process for submitting a warranty claim and customer service contact.
Explains the meaning of the "WARNING!" symbol and its implications.
Defines the "CAUTION" symbol, indicating potential hazards.
Describes the purpose of "TECH TIP" symbols for helpful advice.
Explains the function of "NOTE" symbols for important information.
Advises on using third-party trailers, load stress, and liability.
Explains trike incompatibility with standard bike racks and transport advice.
Details the components of the front wheel assembly.
Describes the parts of the spoked rear wheel.
Outlines the components of the mag rear wheel.
Explains the parts of the rear freewheel system.
Identifies and describes the handlebar mounted controls.
Details the chain, guard, chainring, crank arm, and pedals.
Lists and identifies the battery, keys, handle, ignition, and charging port.
Explains the charger, indicator, and plugs.
Explains the function and mechanism of the quick-release lever.
Step-by-step guide on how to securely tighten the lever.
Instructions for loosening the quick-release lever.
Provides steps for joining the two frame halves.
Explains the correct orientation of the front wheel and fender.
Details the connection of the 3-to-1 cable to the controller.
Explains how to connect the controller cable to the battery.
Instructions on plugging the charger cord into the battery.
Guide on finding the optimal seat height for comfort.
Steps for inserting and securing the seatpost.
How to align and tighten the seatpost quick-release lever.
Step-by-step guide to installing the stem into the frame.
Preliminary checks before adjusting stem height.
Instructions for adjusting the stem to a comfortable height.
Explains how to determine optimal handlebar reach.
Detailed steps for adjusting handlebar position for comfort.
Instructions for attaching the rear basket.
Steps for detaching the rear basket for transport or storage.
Explains the ON, OFF, and UNLOCKED key positions.
Details the function of the locking pin for securing the battery.
Information about the two standard keys provided.
Guidance on what to do if battery keys are misplaced.
Guidelines for safely transporting the battery.
Actions to take in case of a lithium-ion battery fire.
Step-by-step guide to charging the battery.
Explains the meaning of the charger's indicator lights.
Defines battery balancing and its purpose.
Instructions on operating the trike's throttle.
Advice on turning technique, especially on slopes.
Steps for engaging and using the reverse function.
Emphasizes the need for practice to brake smoothly and safely.
Guide on operating the rear coaster brake.
Instructions for using the front disc brake.
Explains the function and use of the parking brake.
Steps to apply the parking brake.
Steps to release the parking brake.
Factors influencing tire pressure settings.
Instructions for inflating tires using a Schrader valve.
Steps for reducing air pressure in the tires.
Presents the choice between disassembly and folding for transport/storage.
Guidance on safely disconnecting various cables.
Steps for removing the rear basket.
Detailed steps for separating the two frame sections.
Instructions for removing the handlebar and stem assembly.
Steps for detaching the seatpost and saddle.
Reasons for folding the trike for transport or storage.
Lists cables that need to be disconnected before folding.
Step-by-step guide on folding the trike.
Identifies and explains the functions of the remote pad buttons.
Instructions for powering the LCD on and off using the remote pad.
Guide to adjusting motor power levels via the remote pad.
Explains how to activate and use the walk assist feature.
Instructions for adjusting the LCD display brightness.
How to use the 5v USB port for charging devices.
Explains the motor power levels and their effects on speed and performance.
Guide to navigating and changing display settings.
Steps to reset max and average speed data.
Instructions for clearing the trip distance data.
Notes that torque figures are recommendations for mechanics.
Common causes and checks for power or motor issues.
Troubleshooting steps for battery display inaccuracies.
General guidelines for cleaning the trike, avoiding electrical parts.
Steps for cleaning and lubricating the drive chain.
Daily or weekly checks for safety and performance.
Specific weekly checks including brake tests and cable inspections.
Recommended checks and inspections every three months.
Maintenance tasks to be performed every six months.
