Electric ED01-T - ED01-T: Setting the Tide; Tide Setting Pushers; Setting Your Local Tide

ED01-T: SETTING THE TIDE
TO SET THE TIDE FOR YOUR LOCAL BEACH YOU MUST LOOK UP THE NEXT TIDE EVENT ON
YOUR LOCAL TIDE CHART
1. PRESS AND HOLD PUSHER A UNTIL THE DISPLAY FLASHES.
2. PRESS PUSHER B TO CYCLE THROUGH HI/LO EVENT TYPE AND EVENT HOURS/MINUTES,
USE PUSHER C AND PUSHER D TO INCREASE AND DECREASE THE VALUE OF THE FIELDS.
3. PRESS PUSHER A TO EXIT SETTING MODE, YOUR LOCAL TIDE IS NOW SET.
PUSHER C
INCREASE VALUE
PUSHER B
NEXT FIELD
PUSHER D
DECREASE VALUE
PUSHER A
PRESS TO ACTIVATE LIGHT
HOLD TO SET