ED01-T: USING THE ALARM
THE ALARM MODE KEEPS AN ALARM THAT CAN BE USED IN EITHER TIME ZONE 1 OR 2
1. TO SET THE ALARM PRESS AND HOLD PUSHER A UNTIL THE TIME DISPLAY FLASHES
2. PRESS PUSHER C TO INCREASE THE FLASHING VALUE, PUSHER D TO DECREASE THE
VALUE AND PUSHER B TO MOVE TO THE NEXT FIELD
3. PRESS PUSHER A TO EXIT SETTING MODE.
PUSHER C
HOURLY CHIME ON/OFF
TIME ZONE INDICATOR CHIME INDICATOR
ALARM TIMECURRENT TIME
PUSHER B
NEXT MODE
PUSHER D
ALARM ON/OFF
PUSHER A
PRESS TO ACTIVATE LIGHT
HOLD TO SET
ALARM INDICATOR
To Next Page
Loading...
