ED01-T: USING THE TIMER
PUSHER A
PRESS TO ACTIVATE LIGHT
HOLD TO SET
1. TO SET THE TIMER LENGTH PRESS AND HOLD PUSHER A UNTIL THE TIME FLASHES
2. PRESS PUSHER C AND PUSHER D TO INCREASE AND DECREASE THE FLASHING VALUE
AND PUSHER B TO MOVE TO THE NEXT FIELD. CHOOSE BETWEEN COUNTDOWN-COUNT
UP, REPEAT COUNTDOWN, OR COUNTDOWN-STOP (HEAT TIMER)
3. PRESS PUSHER D TO EXIT SETTING MODE.
PUSHER C
START/STOP/RESTART
TIMER HOURS/MINUTES TIMER SECONDS
COUNTDOWN MODE
PUSHER B
NEXT MODE
PUSHER D
RESET
To Next Page
Loading...
