Electric ED01 - ED01: Using the Timer

08
ENGLISH
PUSHER A
ACTIVATES LIGHT
THE TIMER STARTS AT A PRE-SET INTERVAL AND COUNTS TO ZERO THEN ALARM SOUNDS.
1. TO SET THE TIMER LENGTH PRESS AND HOLD PUSHER D UNTIL THE TIME FLASHES
2. PRESS PUSHER C TO INCREASE THE FLASHING VALUE AND PUSHER B TO MOVE TO THE
NEXT FIELD
3. PRESS PUSHER D TO EXIT SETTING MODE. THE TIMER LENGTH IS NOW SET.
PUSHER C
START/RESTART
HOURS/MINUTES
PUSHER B
NEXT MODE
PUSHER D
STOP/RESET
ED01: USING THE TIMER
SECONDS