Electrical Test Instruments MAC-20 - Page 27

Electrical Test lnstruments MAC-20 Retroflt Package
Section
lll
-
Operating lnstructjons
current.
6. Repeat the above test for the other
poles
of the circuit breaker.
7 . Shut down test set, disconnect breaker,
and
prepare
for subsequent testing or
relocation
according to steps 20 through 25 in
general
procedures-outlined
above.
Copyright(C)
1994-'1 998
All Rights Reserved
Electrical
Test lnstruments, lnc.
Page
lll-9