To Next PageTo Next Page
Need help?Do you have a question about the Electro Detectors EDA-Z1000 and is the answer not in the manual?
General| Brand | Electro Detectors |
|---|---|
| Model | EDA-Z1000 |
| Category | Security System |
| Language | English |
Details the front panel layout, including status indicators, FAULTS indicators, and all operational buttons and keys.
Guides users through basic system operations, including normal status, fault handling, and alarm management.
Covers advanced functions such as managing access codes, selecting test modes, and disabling system features.
Details the function of each button on the front panel: Function 1/2, Cancel, Enter, Menu, Silence Buzzer, Silence/Re-Sound, and Reset.
Explains how to use the arrow keys to navigate through menus, programming screens, and scroll through current events.
Describes the normal operating screen display, including date, time, and the 'Supply' LED indicator.
Explains how faults are displayed, including device type, description, unit number, and location, and how they scroll.
Details how to silence the buzzer for acknowledged faults, noting that new faults will still sound the buzzer.
Explains how to reset the system after a fault has been rectified and how faults are re-displayed if still present.
Describes alarm display, zone LEDs, and event details including device type, number, and location text, with scrolling.
Procedure for silencing sounders during an alarm, requiring a valid password and noting auto-silence after 30 minutes.
Instructions on how to re-sound sounders after they have been silenced, including programmable lockout times.
How to reset the system after an alarm condition has been investigated, requiring a password and displaying faults.
Explains how to enter the menu system, navigate through options using cursor keys, and return to previous screens.
Guide to setting the system date and time using menu options, with the panel automatically adjusting for daylight savings.
Procedure to isolate a zone, preventing events from it, and how it automatically re-enables after a set timeout.
Method to isolate a specific device, preventing its events from displaying, and how it automatically re-enables.
Steps to re-enable a previously isolated zone and how the 'Disablements' LED extinguishes when all are enabled.
Instructions to re-enable a previously isolated device and the indication when all devices are enabled.
How to access and view logged historical system events, including faults and fires, with date and time stamps.
Explains that advanced users have access to extra functions, but caution is advised due to potential disabling of features.
Procedure to view current basic and advanced user access codes (passwords) on the system.
Steps for changing the basic and advanced user passwords, requiring current password and confirmation of new password.
Guide to entering test mode for system testing, selecting zones, sounder operation, and tone options.
Configuration options within test mode, including actuators, sound areas, fire relay, and timeout settings.
Procedure to exit test mode, disabling testing functions and extinguishing the 'Test Mode' LED.
