8. RCA INPUT – Stereo unbalanced RCA inputs for connecting external audio media devices,
such as MP3 players. Both RCA inputs are summed and can be controlled with INPUT 1
level. The inputs can be used simultaneously with XLR/TRS INPUT 1.
Subwoofer control and monitoring interface
The subwoofer DSP control menu selections are available for the EKX-15SP and EKX-18SP.
Figure 6.2: Subwoofer amplifier panel
1. LCD – DSP control and monitoring interface.
2. MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu.
3. INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
4. POWER – AC switch for switching the power ON or OFF. The LCD screen lights up when
the power is turned ON.
5. MAINS IN – AC connection is established via an IEC-connector.
6. OUTPUT – XLR output sends the input signal to another loudspeaker or subwoofer.
INPUT 1 is linked to OUTPUT 1 and INPUT 2 is linked to OUTPUT 2. The MASTER VOL or
DSP control settings do not affect OUTPUT.
EKX Powered Loudspeakers
2015.01 | 02 | F.01U.308.095 User Manual Electro-Voice
To Next Page
Loading...
