Mounting a loudspeaker on a pole
Figure 4.2: Full-Range/subwoofer stack with pole mount
Caution!
Two person lift and placement is recommended for the heavier loudspeakers. Single person
lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a pole, do the following:
1. Place the subwoofer on a level stable surface.
2. Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.
3. Turn the M20 threaded pole clockwise to secure the pole to the subwoofer.
1. Using two hands lift the loudspeaker.
2. Set the pole cup located on the bottom of the loudspeaker onto the pole.
EKX Powered Loudspeakers
2017.01 | 06 | F.01U.318.952 User Manual Electro-Voice
To Next Page
Loading...
