Electro-Voice EKX-15SP - Suspension and Rigging; Suspension Points

Floor monitor
EKX-12P and EKX-15P loudspeakers may be used as a floor monitor by placing the loudspeaker
on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
Figure 4.3: Optimum coverage in monitor position
4.2
en 15
Electro-Voice User Manual 2017.01 | 06 | F.01U.318.952