Electro-Voice Zx1 Series Owner’s Manual
6
Tripod and Floor Monitor Operation
Floor Monitor
Electro-Voice Zx1 loudspeakers may be used as a floor monitor by placing the speaker on the integral monitor angle. Make
sure to:
• Place the speaker on a level, stable surface that is solid and secure.
• Route cables and position the stand so that performers, production crew and audience
members will not trip over the stand or cables and pull the speaker system over.
• Secure cables with wire ties or tape whenever possible.
Pole Mount Recess
Set Screw
Figure 2a:
Zx1 Pole Mount Location
Figure 1:
Zx1 Monitor Position
To Next Page
Loading...
