Electro-Voice Zx1i Series - Appendix B: Painting the Zx1; TM Speakers; Painting Process; Painting the Grille

Electro-Voice
®
Zx1i Owner’s Manual 11
Appendix B: Painting the Zx1™ Speakers
Painting Process
The Zx1™ is made of high-impact polystyrene, which accepts a wide variety of paints.
· Remove the grille and mask the baffle.
· Clean the cabinet and grille by rubbing the speaker with a lightly dampened
cloth. Do not, however, use abrasives such as sandpaper or steel wool. Never
use gasoline, kerosene, acetone, MEK, paint thinner, harsh detergents, or
other chemicals, as these agents may cause permanent damage to the
enclosure.
· After cleaning, apply latex or enamel paint. Spraying is recommended
Painting the Grille
Painting the grille requires spray painting. If the grille is rolled or brush painted, the mesh
may become clogged with paint and poor sound quality may result.
Appendix C: Technical Specifications
esnopseR.qerF
1
:)Bd3-(zHk02-zH06
egnaR.qerF
1
:)Bd01-(zHk02-zH84
:ycneuqerFssapiH.ceRzH04
ytivitisneSlaixA
1
:)°09(
:)°001(
)m1/W1(Bd49
)m1/W1(Bd29
:)°09(LPSdetaluclaCxaM
:)°001(
Bd321
Bd121
:egarevoClatnoziroH°001ro°09
:egarevoClacitreV°001ro°05
:rewoPmetsySdetaR.tnoCW002
2
kaePW008,.gorPW004,
:recudsnarTFLrevirD)mm302(ni8,L8VE
:recudsnarTFHtixE)mm4.52(.ni1,5002HD
revirDnoisserpmoC
:ycneuqerFrevossorCzHk7.1
:ecnadepmIlanimoNsmhO8
:ecnadepmImuminiMsmhO6
:spaTegattaWnoisreV"T"ssapybmhO8,001,05,52,5.21,6-V07
ssapybmhO8,001,05,52,5.21-V001
:srotcennoCrotcennoCxineohPniP-4
:lairetaMerusolcnEremyloPtcapmIhgiH
:noisnepsuSMASkciuQdetargetnI
MT
ytuD-yvaeH
tekcarBgnitnuoMmrA-gnortS
:ellirGAG81,detaoCredwoPretseyloP
leetSdezinavlaG
:)DxWxH(miDmm362xmm282xmm154
)"53.01x"21.11x"57.71(
:thgieWteNremrofsnarTtuohtiw)sbl5.81(gk4.8
remrofsnarThtiw)sbl0.32(gk4.01
:thgieWgnippihSremrofsnarTtuohtiw)sbl5.22(gk2.01
remrofsnarThtiw)sbl0.72(gk3.21
1
Half Space Measurement.
2
IEC Pink Noise, 6 dB Crest Factor.