9
ENGLISH
BEFORE STARTING
1 Check the dust container is in place.
2 Insert the hose until the release button clicks to
3 Attach the telescopic tube to the hose handle
4 Extend the electric cord and connect it to the
electrical outlet. The vacuum cleaner is fitted
with a cord winder. Once the electric cable has
pedal. The cord will then rewind.
5 The dust container must be emptied when
debris in container reaches “max fill” line or
when the dust container indicator changes
to red while the cleaner is operating and the
6 Start the vacuum cleaner by pressing the power
button. Stop the vacuum cleaner by pressing
once again.
FRANÇAIS
AVANT LA MISE EN MARCHE
bien en place.
une prise murale. L’aspirateur est muni d’un
position.
marche.
ESPAÑOL
ANTES DE COMENZAR
de polvo.
4 Extienda el cable eléctrico y conéctelo a la
5 El contenedor de polvo se debe vaciar si
la suciedad en el contenedor llega al nivel
encendido. Apague la aspiradora oprimiendo
To Next Page
Loading...
