12 installation instructions electrolux e:line built-in microwave oven
For the best integration within a kitchen, install this
appliance in a standard 600mm wide cupboard that gives
a ush t with the surrounding cupboard fronts. A recess of
20mm is ideal.
The built-in cabinet must not have a rear wall behind the
appliance and must have a minimum installation height of
850mm. Do not cover ventilation slots and air intake points.
NOTE: Your appliance must be mounted on a flat
surface for the full width and depth of the product.
Built-in furniture – flush fit
Installation instructions
Please read the manual carefully before installation!
NOTE: The microwave oven is fitted with a plug
and must be only connected to a properly installed,
earthed socket. In accordance with the appropriate
regulations, the socket must only be installed and the
connecting cable must only be replaced by a qualified
electrician. If the plug is no longer accessible
following installation an all-pole isolating switch must
be present on the installation side with a contact gap
of at least 3mm.
Screw (A) x 10
Adjust Screw (B)
Screw (C)
Bottom Brackets
600mm
464mm
(+2)
min 850mm
from floor
to base of
microwave
oven.
min
550mm
45mm
10
To Next Page
Loading...
