Electrolux e:line EMC2867BI - Cabinet Preparation and Mounting; Proud Fit Installation and Ventilation; Flush Fit Top View and Infill Panels

Built-in furniture – proud fit
The built-in cabinet must not have a rear wall behind the
appliance and must have a minimum installation height of
850mm. Do not cover ventilation slots and air intake points.
NOTE: Your appliance must be mounted on a flat
surface for the full width and depth of the product.
electrolux e:line built-in microwave oven installation instrictions 13
A 45mm ventilation gap must be left between the built-in
cabinetry and wall with no back panelling on the cabinet
housing the microwave oven.
Inll panels are recessed 20mm from the external cabinet
door to accomodate ush t.
side view
45mm
450mm
(+2)
min
550mm
600mm
45mm
45mm
ush t top view
inll panel
8mm
packer
microwave
oven
20mm
600mm
cupboard
door
cupboard
door
20mm
external face
of cabinet
and/or door
min 850mm
from floor
to base of
microwave
oven.
microwave
oven