Electrolux e:line EMC2867BI - Final Installation Steps; Cabinet Template and Bracket Fixing; Securing the Oven and Air Tunnel

14 installation instructions electrolux e:line built-in microwave oven
Built-in furniture – proud fit (cont.)
Preparing the cabinet
Read the instructions on the bottom cabinet template and
place the template on the bottom plane of the cabinet. For
flush mounting, recess the template back 20mm from the
front of the cabinet. For proud mounting, align the template
with the front of the cabinet. The front of your template
should always align with the front of the inll panels.
With a pencil, make marks on the bottom plane of the
template according to the marks ‘a’ on the templete.
Remove the bottom cabinet template and x the bottom
brackets with screws (A).
Fix screw ‘B’ on the upper air tunnel of the microwave oven.
Installation instructions
proud t top view
inll panel (not
recessed back from
front of cabinet)
20mm
560 mm
cupboard
door
cupboard
door
‘A’ screws
adjust screw ‘B’
upper air tunnel
trim kit
600mm
+8