10.7 Cleaning the upper spray
arms
We recommend to clean the upper spray
arms regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The upper spray arms are placed under
the upper basket. The spray arms (B) are
installed in the duct (A) with the
mounting elements (C).
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
4. To install the spray arm back, insert
the mounting element in the spray
arm and fix it in the duct by turning it
counterclockwise. Make sure that the
mounting element locks into place.
www.electrolux.com22
To Next Page
Loading...
