11www.electrolux.com
1. Press the two latches and slide the lid forward
to remove the brush roll lid.
Maintenance
Cleaning the Brush roll
2. Pull out the Brush roll and clean the brush and
bearings. Remove entangled threads by snipping
Brush roll can be replaced.
them away with cleaning brush. Refit in reverse order.
Remove the dust container. Remove clogged
debris in the air channel. Put the dust container into
place.
Cleaning the Air channel,
Cleaning the charging connectors
Use a dry soft cloth to regularly clean the
charging connectors on the charging base and
under the machine.
To Next Page
Loading...
