A
C
B
• Take out the cable from the door end
cap and place it into the upper hinge .
• Re- screw the hinge (7).
7
6
• Connect the cable to the socket in the
front panel. (8)
• Put back the top front covers on both
sides (5,9).
• Place the display cable, which is cur-
rently disconnected, into the cable
holder in the door end cap then put
back the door end cap cover (10)
8
9
10
• Remove the covers (A). Remove the
cover plugs (C).
• Unscrew the handles (B)and fix them on
the opposite side. Place the upper han-
dle to the lower door and the lower
handle to the upper door
• Re-insert the cover plugs (C) on the op-
posite side.
A
A
C
C
B
B
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
22
www.electrolux.com
To Next Page