Removing the shelf holders
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the power
socket.
Important! To carry out the following operations,
we suggest that this be made with another person
that will keep a firm hold on the doors of the
appliance during the operations.
To change the opening direction of the door, do
these steps:
1. Open the doors. Unscrew the middle hinge
(m2). Remove the plastic spacer (m1).
m1
m2
m3
m4
m5
m6
2. Remove the doors.
3. Remove the spacer (m6) and move to the oth-
er side of the hinge pivot (m5).
4. Remove using a tool the cover (b1). Unscrew
the lower hinge pivot (b2) and the spacer (b3)
and place them on the opposite side.
5. Re-insert the cover (b1) on the opposite side.
b1
b2
b3
6. Remove the stoppers (1) and move to the oth-
er side of the doors.
electrolux 15
To Next Page
Loading...
