• sounding of buzzer
• alarm symbol.
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
• the display illumination remains red.
When you press Function button / Alarm
reset switch to deactivate the alarm, the
highest temperature reached in the com-
partment appears on indicator
for
some seconds.
At this point the flashing stops and the dis-
play illumination changes over from red to
white.
During the alarm phase, the buzzer can be
switched off by pressing Function button /
Alarm reset switch.
The illumination of the display remains red
until normal storage conditions are re-
stored.
30
www.electrolux.com
To Next Page
Loading...
