10 electrolux control panel
Setting mode
Always remember that when:
- setting the water softener,
- activating/deactivating the rinse aid
dispenser,
the appliance MUST be in setting
mode:
● Press On/Off button, ALL
programme button lights are
illuminated and in the digital
display 3 horizontal lines are
visible = appliance in setting mode.
● Press On/Off button, ONLY a
programme button light is
illuminated and in the digital
display 1 horizontal line is visible =
last performed or selected
programme still set.
In this case, to return to setting
mode, the programme has to be
cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the
two programme buttons positioned
over the word Cancel, until all the
programme button lights will illuminate
and in the digital display 3 horizontal
lines appear. The programme has
been cancelled and the machine is
now in setting mode.
117991 68/0en 19-01-2007 11:08 Pagina 10
Downloaded from DishWasher-Manual.com Manuals
To Next Page
Loading...
