5.2 Consumption values
Programme
1)
2)
Duration (min) Energy (kWh) Water (l)
140 1.20 9.6
120 1.05 7.7
230
3)
/ 230
4)
0.609
3)
/ 0.613
4)
6.5
3)
/ 6.5
4)
75 0.65 5.8
20 0.39 7.0
90 1.10 6.6
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
3)
In accordance with the 1016/2010 regulation.
4)
In accordance with the 2019/2022 regulation.
5.3 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
5.4 Before starting a
programme
Before you start the selected
programme, make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the type
of load and the degree of soil.
• The correct quantity of detergent is
used.
5.5 Using a programme
1. Open the appliance door.
2. Open the water tap.
3. Press the On / off button to activate
the appliance.
The On / off indicator comes on.
4. Press Programmes until the indicator
of the selected programme comes
on.
5. Close the appliance door. The
programme starts automatically after
10 seconds.
When the programme is completed, an
intermittent acoustic signal sounds for
approximately 8 seconds.
6. Press On / Off to deactivate the
appliance.
7. Close the water tap.
Wait until the dishes are cold before you
remove them from the appliance.
There can be water on the
sides and the door of the
appliance.
5.6 Cancelling a programme
Press and hold Programme for 3
seconds.
The appliance comes back to its initial
settings.
www.electrolux.com8