Electrolux ESL4201LO - Page 9

is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of
programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold the programme button until the
indicator flashes and
indicators
and are on.
2. Press the programme button
immediately.
• The indicator and are
on.
• The indicator flashes.
3. Wait until the indicator and
are off. The indicator still
flashes.
• The indicator shows the
current setting: off = Acoustic
signal off.
4. Press the programme button to
change the setting.
• on = Acoustic signal on.
5. Press on/off confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding and
(if applicable).
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold the programme button until the
indicator flashes and
indicators and are on.
2. Press the programme button twice.
• The indicator
and
are on.
• The indicator flashes.
3. Wait until the indicator and
are off. The indicator still
flashes.
• The indicator shows the
current setting:
off = AirDry is
deactivated.
4. Press the programme button to
change the setting.
• on =AirDryis activated .
5. Press on/off to confirm the setting.
ENGLISH 9