03
The appliance may contain flammable R600a refrigerant.
Avoid safety hazards by carefully installing, handling,
servicing and disposing of this appliance. If your appliance
contains R600a, it will be indicated on the rating plate.
Ensure that the tubing of the refrigerant circuit is
not damaged during transportation and installation.
In the event of any accidental damage, keep
the appliance away from open fires and devices
that can produce sparks or arcs and luminaries
during normal or abnormal operation. Unplug the
appliance at the power point and call the authorised
service personnel for necessary action and advice.
The space for installing the refrigerator must be at least 1
m³ per 8 g of refrigerant. The amount and type of refrigerant
used are indicated on the rating plate inside the appliance.
• Do not use a steam cleaner to clean the appliance. If
live components come in contact with the condensing
steam, they may short circuit or cause an electric
shock.
• Keep ventilation openings, either in the appliance
enclosure or in the built-in structure, clear of
obstruction.
• Do not plug the appliance into a timer fitted to the
power point.
• Do not place your appliance on an uneven surface.
• Do not store explosive substances such as aerosol
cans with flammable propellant in the appliance.
• Do not store fizzy drinks in the freezer compartment.
• Never try to repair the refrigerator on your own. Use
only a qualified or authorised service person for repairs.
• Never use electric heaters or dryers to defrost the
freezer because you can receive an electric shock.
• Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING
The LED feature lights at the crisper bin of the models
ETE3200 and ETE3500 are not user-replaceable. In the
unlikely event the LED lights should ever fail, they should
be serviced by the manufacturer, its service agent or
similarly qualified person.
WARNING
Stable Footing
When your refrigerator is in place, you need to stabilize
it. Lift the front of the refrigerator to take the weight off
each stability foot and make small quarter turns to each
foot until it is in firm contact with the floor. If you intend to
move the refrigerator, remember to wind up each foot so
that you can move it freely. Repeat the process of the foot
adjustment once you have settled on the new location of
the refrigerator.
Conditions of use
This refrigerator is intended for use in households and
other similar places such as:
- Staff kitchens in shops, offices and other working
environment
- Hotels, motels, farm houses and other residential-type
environment
- Bed and breakfast type of environment
- Catering houses and other similar type of environment
WARNING
Stabilising
foot wound
down
Side View
To Next Page
Loading...
