9
F.Mod. factory description of product
Comm.Model commercial description
PNC production number code
Ser.No. serial number
EL power supply voltage
230V 3 - 230V 1N electric convertibility
Hz power supply frequency
Max – kW
max. power
Nominal – kW nominal power
IPX4 dust and water protection rating
CE CE marking
Electrolux
Professional SpA
Viale Treviso 15
33170 Pordenone
Italy
manufacturer
The dataplate is located on the right side panel of the
equipment.
WWAARRNNIINNGG
Do not remove, tamper with
or make the machine
marking illegible.
IIMMPPOORRTTAANNTT
When scrapping the machine, the
marking must be destroyed.
NOTE!
Refer to the data given on the machine marking for
relations with the Manufacturer (e.g. when ordering
spare parts, etc.).
BB..66 HHooww ttoo iiddeennttiiffyy tthhee tteecchhnniiccaall ddaattaa
To identify the technical data, read the factory description of
the product (F. Mod.) on the dataplate, identify the main
machine data and consult D.1
Main technical characteristics
paragraph.
BB..66..11 HHooww ttoo iinntteerrpprreett tthhee ffaaccttoorryy ddeessccrriippttiioonn
The factory description on the dataplate has the following
meaning (some examples are given below):
VVeerrssiioonn
(1) (2) (3) (4) (5) (6) (7)
E UC A 1 DD G
N UC A 1 G R UK
E UC 1 WS
N UC 3 WS
Z UC 3 DD WS
(1) Brand E = Electrolux, N = To brand, Z = Zanussi
(2) Machine
type
UC = Under counter
(3 - 6)
Options
1 = Single phase, 3 = Three phases, A =
Atmospheric, DP = Drain pump, WS =
Water Softener, DD = Detergent pump, G =
Detergent pump + rinse aid pump + drain
pump, MS = Multi rack support, R =
Additional rack, UK = UK market
BB..77 RReessppoonnssiibbiilliittyy
The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and
replacements with parts different from those specified in
the spare parts catalogue (the fitting and use of non-
original spare parts and accessories can negatively affect
machine operation and invalidates the warranty);
• operations by non-specialised technicians;
• unauthorised modifications or operations;
• inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
• use of the machine by uninformed and untrained
personnel;
• non-application of the current provisions in the country of
use, concerning safety, hygiene and health in the
workplace.
The Manufacturer declines any liability for damage caused by
arbitrary modifications and conversions carried out by the
user or the Customer.
The employer, workplace manager or service technician are
responsible for identifying and choosing adequate and
To Next Page
Loading...
