Electrolux EUF2040AOW User Manual

Problem Possible cause Solution
The temperature in the
appliance is too high.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
Power indicator light is
flashing.
An error has occurred in
measuring the tempera‐
ture.
Contact a qualified electri‐
cian or contact the nearest
Authorised Service Centre.
The appliance is not
working properly.
Contact a qualified electri‐
cian or contact the nearest
Authorised Service Centre.
The temperature in the
appliance is too high.
Contact a qualified electri‐
cian or contact the nearest
Authorised Service Centre.
The compressor operates
continually.
Temperature is set incor‐
rectly.
Refer to "Operation" chapter.
Many food products were
put in at the same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed
correctly.
Refer to "Closing the door".
The FastFreeze function
is switched on.
Refer to "FastFreeze func‐
tion".
There is too much frost
and ice.
The door is not closed
correctly or the gasket is
deformed/dirty.
Refer to "Closing the door".
The compressor does not
start immediately after
pressing the FastFreeze,
or after changing the tem‐
perature.
This is normal, no error
has occurred.
The compressor starts after
a period of time.
Water flows on the floor. The melting water outlet
is not connected to the
evaporative tray above
the compressor.
Attach the melting water out‐
let to the evaporative tray.
www.electrolux.com12

Electrolux EUF2040AOW Specifications

General

Brand	Electrolux
Model	EUF2040AOW
Category	Freezer
Language	English