Electrolux EUF2744AOW - Page 16

9.6 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
1. Remove the upper hinge cover with a
screwdriver (4).
2. Open the door and remove the door
end cap cover (1).
3. Remove the top front covers on both
sides (2,6).
4. Unplug the cable connector of the
display (3).
3
2
1
5. Unscrew the hinges and remove the
door.
4
5
6. Remove the cap (A) with the help of
a tool.
7. Unscrew the lower hinge (C) and the
washers (B).
8. Position the pin and the washers on
the opposite side.
9. Re-insert the cover (A) on the
opposite side.
A
C
B
10. Place the door on the lower hinge.
11. Take out the cable from the door end
cap cover and place it into the upper
hinge.
12. Re-screw the hinge (7).
www.electrolux.com16