9
4 Gently set the shelf onto the hanger
once the back is secured by the hanger.
Installation
5 Remove shelf from its locked position
by pulling the slide mechanism
toward you.
6 Lift the hanger directly upwards and
pull toward you to remove it from the
ladder.
Reposition the Air Seal
(select models)
1 Remove air seal by pushing seal
straight back.
2 Position the air seal towards the outside
edge of the shelf to avoid the air tower
when shelf is pushed back into place.
3 Install seal by sliding the open
channel end of the seal onto back
edge of shelf until seal sits snug on
back of shelf and flap sits at about a
10 degree angle from shelf surface.
Air Seal
Air Seal
To Next Page
Loading...
