Electrolux EW30DS75KS - Care and Cleaning; Cleaning Cooktop, Burner Grates, Caps and Heads

51
Double ring burner cap
Theglassinthedoubleringisdesignedtot
loosely. Clean with normal non abrasive glass type
cleaner and thoroughly dry before replacing.
Burnerheads
Lift the burner cap from the burner head. The
surface burner heads are secured to the cooktop
and must be cleaned in place.
Forpropergasowitmaybenecessarytoclean
theburnerheadsandslots.Toclean,rstusea
cleanDAMPclothtosoakupanyspills.Remove
any food from between the burner slots using a
small nonabrasive brush like a toothbrush and
afterwards wipe using a damp cloth. For stubborn
soils located in the slots, use a small-gauge wire or
needle to clean.
Should you experience ignition problems it may be
that an ignition port hole is partially blocked with
soil(seegs1&2).Withtheburnerheadinplace,
use a small wire gauge needle or the end of a
paper clip to clear the ignition port or ports.
Figure 1 - Cooktop burner head
(AllburnersexceptDoubleringburner)
Figure2-Doubleringburnerhead
(Modelsequippedwithdoubleringburneronly)
Slots
Ignition port
Oriceport
Slots
Ignition
port
Orice
port
Orice
port
Cleaning cooktop, burner
grates, caps and heads
Care and Cleaning