Electrolux EW30GS80R - Oven Temperature Adjustment (Offset); Factory Default Reset

43
Setting Your Preferences
Adjusting oven temperature -
User preference offset
Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
Fortherstfewuses,followyourrecipetimesand
temperature recommendations carefully.
If you feel your oven is too hot or too cool from your
baking experience, the oven temperature may be
adjusted to your liking. The temperature may be
increased up to +35°F (+19°C) or decreased down
to -35°F (-19°C) from normal.
See the example below to increase the
temperature in the upper oven.
To set the temperature lower use
the lo- key.
Example
Step Press
1. Press and continue to press
USER PREF until you reach
the user preference offset
mode -Fig. 1-.
2. To increase the oven
temperature by 10
0
F, press +hi
until 10 appears next to UPO
-Fig. 2-
3. Press START to accept or
press CANCEL to reject.
or
Factory default reset
You may choose to restore your factory settings.
This will erase all settings or favorites that you
have saved.
See the example below reset your control.
Fig. 1 Fig. 2
Example
Step Press
1. Press and continue to press
USER PREF until you reach
the factory default reset mode.
-Fig. 1-
2. Use the +hi or -lo to toggle to
the no -Fig. 1- or Yes -Fig. 2-
option to reset.
or
3. Press START to accept or
press CANCEL to reject.
or
Fig. 1 Fig. 2
NOTE:Donotuseoventhermometerssuchas
those found in grocery stores to check the tempera-
ture settings inside the oven. These thermometers
may display temperatures that vary greatly from the
actual temperature.