12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off
button for a few
seconds to activate the appliance.
A short tune sounds.
12.2 Loading the laundry
1. Open the appliance door.
2. Empty the pockets and unfold the
items before you put them in the
appliance.
3. Put the laundry in the drum, one item
at a time.
Do not put too much laundry in the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
gets caught between the
seal and the door to avoid
risk of water leakage and
damage to the laundry.
Washing heavily oiled,
greasy stains could cause
damage to rubber parts of
the washing machine.
12.3 Filling the detergent and
additives
Compartment for prewash
phase, soak programme or
stain remover.
Compartment for washing
phase.
Compartment for liquid addi‐
tives (fabric conditioner,
starch).
Maximum level for quantity of
liquid additives.
Flap for powder or liquid deter‐
gent.
Always follow the
instructions that you find on
the packaging of the
detergent products, but we
recommend that you do not
exceed the maximum
indicated level ( ). This
quantity will however
guarantee the best washing
results.
After a washing cycle, if
necessary, remove any
detergent residue from the
detergent dispenser.
12.4 Check the position of the
detergent flap
1. Pull out the detergent dispenser until
it stops.
ENGLISH 23
To Next Page
Loading...
