Programme
Default tempera‐
ture
Temperature
range
Refer‐
ence spin
speed
Spin
speed
range
Maxi‐
mum
load
Programme description
(Type of load and level of soiling)
Aclarado/Enxag.
1600 rpm
(1600-
400 rpm)
8 kg All fabrics, except woollens and very
delicate fabrics. Programme for rinsing
and spinning the laundry. The default spin
speed is the one used for cotton pro‐
grammes. Reduce the spin speed accord‐
ing to the type of laundry. If necessary, set
the Aclarado/Enxague Extra option to add
rinses. With a low spin speed, the appliance
performs delicate rinses and a short spin.
Limp. Máquina
60 °C
1200 rpm
(1200 -
400 rpm)
-
Maintenance cycle with hot water to clean
and freshen the drum and to remove resi‐
due that may cause odour. For the best re‐
sult use this cycle once a month. Before
running this cycle, remove all items from the
drum. In the washing phase compartment of
the detergent dispenser, put the flap of the
compartment in upward position. Pour a
cup of chlorine bleach or a washing ma‐
chine cleaner in the washing phase com‐
partment. DO NOT use both together.
After the drum cleaning, run a
further rinse cycle with empty
drum and no detergent to re‐
move any residue of bleach.
If you set this programme with the Secar,
the appliance performs the anti-fluff action.
Refer to chapter 'Fluff in the fabrics'.
Anti-Alergia
60 °C
1600 rpm
(1600 -
400 rpm)
8 kg White cotton items. This high-performance
wash program combined with steam va‐
pour, removes more than 99,99% of bacte‐
ria and viruses
6)
keeping the temperature
above 60°C throughout the washing phase;
with an additional action on the fibers
thanks to a vapour phase, an enhanced
rinsing phase ensures a proper removal of
detergent and micro-organism residues.
This program ensures also a proper reduc‐
tion of pollens/allergenic items.
www.electrolux.com20
To Next Page
Loading...
